[Home] [Search] [FAQ] | |
---|---|
[Private Message] [Register] [Profile] [Member list] [Log-in] |
Who's Online: |
There are 0 member(s), and 1 guest(s) online. |
[Printable Version] [Post Reply] |
Author | Message |
---|---|
Anon Deleted Posts : Location : Status : Offline |
Manual Gearbox Oil Please could anyone advise on the correct oil for the manual gearbox on our 1983 CF 250 Autosleeper - as in the Haynes manual it mentions three different types of box and two different oils..... EP 80 and EP 90. Many thanks !---------------------- | Wed 03 Jul 2013 @ 18:06 |
Gethin Card Holder Posts : 462 Location : east lancs Status : Offline |
you need to find out which gearbox you have fitted to enable you to use the correct oil....... it will either be a ZF or a vauxhall box | Wed 03 Jul 2013 @ 19:49 |
Anon Deleted Posts : Location : Status : Offline |
Thanks Gethin - will use the Haynes photo to try to identify it ! | Wed 03 Jul 2013 @ 20:37 |
Anon Deleted Posts : Location : Status : Offline |
My van is actually 1984 I have realised.....it has the Vauxhall gearbox and according to Adrian Bailey it is best to use 20/50 engine oil in this gearbox. The gearshift on the box is a little stiff so would the 20/50 as opposed to the EP 90 help with this ? Also, the Haynes manual shows a drain plug but there isn't one so I guess I have to siphon the old oil out.... so any tips on how best to do that would be greatly appreciated ! | Thu 04 Jul 2013 @ 18:51 |
Gethin Card Holder Posts : 462 Location : east lancs Status : Offline |
20/50 is not recommended in gearboxes as when oil is hot the oil will be to thin. before you drain the box try adding PTFE powder this will ease the stiffness , or help a little .. is the stiffness there when engine is not running?? | Thu 04 Jul 2013 @ 19:31 |
Anon Deleted Posts : Location : Status : Offline |
Thanks once again Gethin - the van was laid up for a long time and now it has had a run for the MOT etc, the problem seems to have gone away. If it returns I now know what to do ! | Sat 06 Jul 2013 @ 09:16 |
Time in GMT |
[Post Reply] | |
New posts since your last visit | Administrative Functions: Open/Close/Delete Thread / Move Thread |
Old post |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c